Common Problems and Troubleshooting for Sub Zero Refrigerators

As of now, Sub Zero refrigerators are considered as one of the best brands in America, because they are extremely energy-efficient and have an additional sealing rubber layer and insulation which help to tap the cold in so as to keep your food fresh for long. The fridge also has spill-proof shelves, multiple compressors and evaporators, dual refrigeration sections and digitized temperature controls as well as readouts. No wonder, the fridge is like a jewel of your kitchen. And if it suffers from any problem, your whole schedule gets disturbed and you want to get over the problem as soon as possible. Here are some of the commonest problems the Sub Zero refrigerators undergo and you can overcome them, if you know some basics.

The Fridge Stops Working

Yes, this is the commonest problem for any kitchen gadget that it just stops working. If it happens in the case of a Sub Zero refrigerator, test first the outlet. Ensure that the fridge is plugged in tightly and there is no loose wire. You can test the outlet by plugging in another appliance, if it is working or not.

You may also check if the fridge is running a defrost cycle. If it is, wait till the cycle completes and see if the refrigerator starts working again.

If the problem persists, check the circuit breaker or fuse box. If the fuse is damaged, it needs to be replaced or you can change the setting of the circuit breaker from “off” to “on”.

Lastly, you can try clearing the condenser area situated on the top of the fridge behind the grille. Lift up the bottom edge of grille and tilt its frame towards your side and clean the area with a handheld vacuum cleaner having a soft-bristled brush. This cleaning process should be repeated after every 3 to 6 months.

Icemaker Problem

Sometimes the ice-maker of the fridge stops working or the ice cubes look discolored or smell weird. If this is the problem, turn the icemaker on by pressing the icemaker switch on the control panel. Check if the water supply behind the unit is correct. If it is loosened, connect it properly. Next, replace the water filter cartridge inside the icemaker. This can be done by taking out the grill in the same way as told in the earlier problem. That way you can access the water filter.

Now as you reach the filter, rotate it anticlockwise and squeeze it until it is loosened. Put the new cartridge in and ensure that you have bordered the filter head with the locking tabs. Turn the new cartridge clockwise, to about one quarter. Wait till the fridge makes a new lot of ice, but discard the first one.

Fridge Running More than Normal

This happens on a particularly hot day or when you place a lot of food in the fridge. To stay cool, the fridge runs more than normal. In this case, check whether the door of the fridge closes properly. You may find a drawer that obstructs the door from closing completely. If the door is closing alright, you may have to clean the condenser part as told in the previous problem.

These are not the only problems of Sub Zero refrigerators and you may come across many more, in which case you can seek a professional like Sub Zero Repair Seattle – the best repair service for your kitchen appliances. You can depend on them for fast, reliable and friendly service so that your fridge works smoothly for you.